BimmerWorld TA8S 18 inch Flow-Form Wheel - E46 M3, E9X M3, F8X M2/M3/M4 - Silver - 18x10.5 - ET36

Unique size and offset: 18x10.5 ET36 for E46 M3, E9X M3, F87 M2, F80 M3, and F82 M4

This wheel has a unique purpose: fitting 295 square on M2, M3, and M4 track cars. All you need* is 20mm spacers up front and a lot of negative camber.

Fitting anything larger than 285 is a challenge on these cars. On our GTMore project we use different control arms, a special coil over strut, and 11.0 inch wide wheels to get 315 tires to fit. That creates a car that is uniquely suited for the track. If your M2/M3/M4 is a dual-purpose car and you want a dedicated track wheel setup and fat 295 tires, this 10.5 wheel is part of the answer*.

*to achieve fitment of 295 tires (or any super-wide 275 or 285) you will need the 20mm front spacers, coilovers with slim springs and perches (2.25 is our recommendation), and camber plates capable of reaching -3.8°. Shorter main springs may also help to get the lower spring perch above the tire. Keep in mind this is a very aggressive tire and wheel fitment and rubbing on bodywork is expected**.

Ordering 4 wheels will be a square set of 18x10.5 ET36 so the wheels can be rotated and no spacers are required on the rear.

The TA8S has all of the features necessary to be one of the best flow-formed wheels on the market. Period. 
+ 1,650lb (750kg) load rating 
+ Light weight - 18x10.5 is 21.3lbs 
+ Tested and passed SAE, JWL, and VIA testing standards 
+ Focus on barrel and rim strength 
+ Spokes that extend over the outer rim 
+ Flow-formed, roll-forged barrel - high strength but low weight 
+ Knurled bead seat reduces tire slippage 
+ Large spoke clearance for big brake kits 
+ Closed-face hub maximizes strength in the hub 
+ Accepts factory lug bolts, wheel locks, or stud conversions 
+ Accepts OE BMW center cap (TA8S cap included) 
+ Protective recessed valve stem pocket 
+ Tire pressure monitoring system (TPMS) compatible (not included)

Our approach with the TA8S was to add back mass and durability where it would be beneficial, specifically in the barrel. The added strength is key to durability for potholes but also for the harsh race kerbing that will chew up featherweight wheels. The TA8S uses the latest flow-form manufacturing process to produce a light weight, strong, BMW track wheel with plentiful caliper clearance for street, track, autocross, and racing use.

Spoke profile and shape were studied to give as much clearance as possible for big brake kits. The curved Y-spoke design stretches all the way to the outer lip, a key component to the TA8S' strength. They also allow generous caliper clearance behind the spokes. 18" sizes clear Brembo F40 and Monobloc, StopTech ST60, Alcon, and PFC 355mm and 380mm 4- and 6-piston brake kits.

Price is per wheel.

**Fitment Note: these are sold as a race-fitment only and rubbing with bodywork or on suspension may occur depending on tire choice and suspension settings. We cannot verify fitment with every combination of wheel-tire-suspension. Verification of wheel fitment is the responsibility of the customer. Please contact us directly if you have any questions or concerns. Returns are limited to quality issues only.

 

BMW Fitments:

2 Series
F22 / F23 (2014+) > M235i-Racing
F22 / F23 (2014+) > M240i-Racing
2 Series
F87 (2016+) > M2 CS Racing
F87 (2016+) > M2 N55 (2016-2018)
3 Series
E46 (99-05) > M3
3 Series
E90 / E91 / E92 / E93 (06-13) > M3
3 Series
F80 (2015-2018) > M3 (2015-2018)
4 Series
F82 / F83 (2015-2020) > M4 (2015-2020)