Audi Engine Oil Change Kit - Liqui Moly 079198405EKT2

Modern top class low-friction, fully synthetic motor oil for all-season use in gasoline and diesel engines without diesel particulate filters (DPF).

Properties

• smooth engine running
• outstanding engine cleanliness
• high shear stability
• saves fuel and reduces pollutant emissions
• tested for turbochargers and catalytic converters
• excellent wear resistance
• outstanding lubrication reliability
• optimum stability to aging
• optimum oil pressure under all operating conditions
• rapid oil delivery at low temperatures

Specifications and approvals

• ACEA A3
• ACEA B4
• API SN
• API CF
• BMW Longlife-01
• MB-Approval 229.5
• Porsche A40
• Renault RN 0700
• Renault RN 0710
• VW 502 00
• VW 505 00

LIQUI MOLY also recommends this product for vehicles or assemblies for which the following specifications or original part numbers are required:

• Chrysler MS-10725
• Chrysler MS-10850
• Fiat 9.55535-H2
• Fiat 9.55535-M2
• Fiat 9.55535-N2
• Fiat 9.55535-Z2
• Opel GM-LL-B-025
• Peugeot Citroen (PSA) B71 2294
• Peugeot Citroen (PSA) B71 2296

This Kit Includes:

• 9L of Liqui Moly 5W-40 Leichtlauf High Tech Engine Oil (8.3L / 8.8qt Filling Capacity)
• Engine Oil Filter
• Drain Plug Washers (SEE BELOW)

Oil Change Process and Torque Specifications

Drain Plug Opening Sequence:

• Loosen and Remove Oil Drain Plug from Oil Reservoir Line - Replace Seal (N-013-812-8) and Tighten Oil Drain Plug
• Loosen and Remove Oil Drain Plug from Sealing Flange - Replace Seal (N-013-806-3) and Tighten Oil Drain Plug
• Loosen and Remove Oil Drain Plug from Oil Pump (Lower) - Replace Seal (N-013-811-5) and Tighten Oil Drain Plug
• Loosen and Remove Oil Drain Plug from Oil Pump (Side) - Replace Seal (N-013-811-5) and Tighten Oil Drain Plug
• Loosen and Remove Oil Drain Plug from Oil Cooler - Replace Seal (N-013-815-7) and Tighten Oil Drain Plug

Torque Specification(s):

• Oil Reservoir Line Drain Plug - N-106-379-01 - 10 Nm
• Sealing Flange Drain Plug - N-911-194-01 - 12 Nm
• Oil Pump (Lower) Drain Plug - N-016-024-3 - 10 Nm
• Oil Pump (Side) Drain Plug - N-016-024-3 - 10 Nm
• Oil Cooler Drain Plug - N-029-701-4 - 22 Nm
• Oil Filter Housing Cover - 079-115-433-D - 25 Nm

Filling Procedure

• Fill the Oil Reservoir with 7L of Engine Oil.
• Start the engine and let it idle for about 30 seconds.
• Fill an additional 1.3L of Engine Oil in the Oil Reservoir.
• Verify Engine Oil Level via MMI after 2 minutes of idle, verifying Oil Temperature is between 100° to 110° and the vehicle has been turned off for an additional 2 minutes. Ensure the vehicle is on level ground while checking oil levels.

Fits These Cars